Getmecom HDTV Multiswitch 4 x 4 & Lnb V/H C-Band Dual Output

Getmecom HDTV Multiswitch 4 x 4 & Lnb V/H C-Band Dual Output : 

(Harga : Rp.280.000,- terdiri dari : 2 LNB V/H 13K + MULTI SWITCH 2 SAT untuk  4 RECEIVER , Braket twin, Kabel Jumper. ) 

 2 Lnb V/H Dual Output C-Band untuk sat Palapa & Telkom Noise 13K , harga: 280.000,-
1 Multiswitch GM 400
4x4 HDTV Multiswitch
Input 18v 22k , 13v 22k , 18v , 13v 
Insertion Loss : 3 db 

Frequency Range : 950 - 2150 Mhz

harga: 280.000,- belum ongkir

Cara Pemesanan:  sms kan : Nama # Alamat Lengkap# jenis Barang yang dipesan # Jumlah yang dipesan.  

ke HP: 082332595267//085785522917/Whatss App 087805892026

Pembayaran Transfer Ke rek : 
BRI UNIT PALANG NO. REK 6566-01-005139-53-7 AN. IMAM SYAFI'I 
atau
MANDIRI CAB. TUBAN NO. REK 140-00-1317681-4 AN. IMAM SYAFI'I 

Read more »

PANDUAN SUPERBOX F16

User Manual for Adding BISS Key

When you want to look the BISS programs, you need to add the BISS KEY first. Here we show the steps of adding BISS key for you:

1. Press the “MENU” key, you will see the picture as below.

2. Choose “information” and press “ENTER” key to enter into the menu as below:

3. Choose “Key Edit” and press “ENTER” key to enter into the menu as below:

4、Choose “Biss” and press “ENTER” key to enter into the menu as below:

5. Here you can edit/add/delete/recover the BISS key. If you press the GREEN key, you will add a new BISS key. When adding BISS key, you should input the program’s frequency “Freq(dec)” and the service id “ServId(dec)”. The “Type” you should choose “Key8”, then input the right BISS Key in “KeyData”. The picture is shown as below:

6. When the BISS Key was added or edited, press “MENU” key or “EXIT” key, you will see the picture as below. Press “Yes” to save, press “NO” to give up. If the BISS key parameter is right, you can watch the BISS programs now.

OPERATION MANUAL OF CCCAM

1.         PRESS MENU, THEN CLICK “NetWork”

2.         Under the “Network”, please click “Wifi Manager”

Choose the wifi internet which you want to connect, then press OK to edit password

3.         Under the “Network”, press “8899”, “Network Client”will come out of menu.

4.         Enter“Network Client”, you can edit Protocol and Cccamd and other data。

How to enter into Svideo

1、  Make sure that Network connection is successful;

2、  Enter into main menu, you will see the picture as below:

3、  Focus on “Svideo” and press “ENTER” key, you will see the picture as below:

4、  Only if you press the password “3170” can you see the svideo’s details. The detail picture is shown as below:

If you input other password, it will appear the “System Information” menu. The picture is shown as below:

 

Read more »